Highly Selective and Sensitive Graphene Based Electrochemical Sensor for Quantification of Receptor Agonist Rizatriptan

A highly selective and sensitive electrochemical sensor has been developed by modification of a glassy carbon electrode (GCE) with graphene (GRP) for quantification of Rizatriptan. The significant increase of the peak current and the improvement of the oxidation peak potential indicate that the electrochemical sensor facilitates the electron transfer of Rizatriptan. The oxidation peak current was proportional to the Rizatriptan concentration in the range from 100 to 600 µg/mL with detection (LOD) and quantification limit (LOQ) of 36.52 and 121.73 µg/mL, respectively. The developed method was successfully employed for quantification of Rizatriptan in pharmaceutical formulations. The sensor shows great promise for simple, sensitive and quantitative detection of Rizatriptan.     

One-step construction of MoO_2 uniform nanoparticles on graphene with enhanced lithium storage

Transition-metal oxides are considered to be a promising anode material for lithium-ion batteries(LIBs)due to their high capacities,low cost,and ease of synthesis.Herein,a hybrid nanosheet composed of uniform MoO_2 nanoparticles(NPs) homogeneously immobilized on the reduced graphene oxide nanosheets(MoO_2 NP@rGO) is first synthesized by a self-templating and subsequent calcination treatment.The unique two-dimensional hybridnanosheets provides several merits.rGO can be used as a favorable support for the loading of electrochemically active MoO_2 NPs.Meanwhile,MoO_2 NPs can effectively prevent the stacking of the rGO.The effective combination of MoO_2 NPs and rGO nanosheets furnish additional electrochemically interfacial active sites for extra lithium ion sto rage.Noticeably,the as-fabricated hybrid nanosheets deliver a reversible capacity of 641 mAh/g after 350 cycles at a current density of 1000 mA/g with a good rate capability.The greatly enhanced lithium storage properties of MoO_2 NP@rGO indicate the importance of elaborate construction of novel hybrid hierarchical structures.     

The hyperconjugation effect on the graphene counterparts based on silicon and germanium

Bending of the A = A (A of the group IVA) double bond neighboring is rationalized by the hyperconjugation phenomenon analysis. The bending is also observed for the high sized linear, cyclic or graphene-like compounds that imply the conjugated double bonds. The electronic delocalization takes place between occupied σ(π) and unoccupied π*(σ*) orbitals especially for compound implying Si and Ge atoms. Leading to rippled structure, this phenomenon affects the silicene and germane thickness sheets and probably would have some consequences on the properties of such compounds when they will be involved in the industries in the future. However we introduce a new parameter to assess the thickness of graphenic structures when the hyperconjugation takes place in the bonding framework. The study has been undertaken at high levels of theory like B3LYP/6-311 + G(3df,2p).     

Pd-Pt loaded graphene aerogel on nickel foam composite as binder-free anode for a direct glucose fuel cell unit

Fabrication of electrocatalyst for direct glucose fuel cell (DGFC) operation involves destructive preparation methods with the use of stabilizer like binder, which may cause activity depreciation. Binder-free electrocatalytic electrode becomes a possible solution to the above problem. Binder-free bimetallic Pd-Pt loaded graphene aerogel on nickel foam plates with different Pd/Pt ratios (1:2.32, 1:1.62, and 1:0.98) are successfully fabricated through a green one-step mild reduction process producing a Pd-Pt/GO/nickel form plate (NFP) composite. Anode with the binder-free electrocatalysts exhibit a strong activity in a batch type DGFC unit under room temperature. The effects of glucose and KOH concentrations, and the Pd/Pt ratios of the electrocatalyst on the DGFC performance are also studied. Maximum power density output of 1.25 mW cm⁻² is recorded with 0.5 M glucose/3 M KOH as the anodic fuel, and Pd₁Pt_0.98/GA/NFP as catalyst, which is the highest obtained so far among other types of electrocatalyst.     

Synthesis of the polyethylene glycol solid-solid phase change materials with a functionalized graphene oxide for thermal energy storage

Polyethylene glycol (PEG) as a phase change material possesses three obstacles, such as leakage, low thermal conductivity and low thermal stability. A novel solid-solid phase change material (PCM) based on functionalized graphene oxide (GO), Polyethylene glycol (PEG) was prepared, and the three obstacles of PEG as a PCM was solved in one and the same material. Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), Raman and Transmission electron microscope (TEM), X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TG) and thermogravimetric analysis/infrared spectrometry (TG-IR) were used to study the properties of supporting material and composite PCM (CPCM). The results indicated that the PEG was grafted on the surface of the supporting material; Compared with pure PEG, the latent heat of CPCM with 9.6 wt% supporting material decreased only 5.3%, however, the thermal conductivity of CPCM increased 111% and the heat peak release rate of CPCM decreased 33.4%.     

Transport properties of mesoscopic graphene rings

Based on a recursive Green's function method, we investigate the conductance of mesoscopic graphene rings in the presence of disorder, in the limit of phase coherent transport. Two models of disorder are considered: edge disorder and surface disorder. Our simulations show that the conductance decreases exponentially with the edge disorder and the surface disorder. In the presence of flux, a clear Aharonov-Bohm conductance oscillation with the period Φ₀ (Φ₀=h/e) is observed. The edge disorder and the surface disorder have no effect on the period of AB oscillation. The amplitudes of AB oscillations vary with gate voltage and flux, which is consistent with the previous results. Additionally, ballistic rectification and negative differential resistance are observed in I-V curves, with on/off characteristic.     

Surface modification by graphene oxide:An efficient strategy to improve the performance of activated carbon based supercapacitors

An efficient and cost-effective strategy to modificate the surface of active carbon (AC), form a 3D-conductive network, and therefore improve the electrochemical performance of AC based supercapacitor was developed.     

Nonlinearity of the zigzag graphene nanoribbons with antidots via the f-deformed Dirac oscillator in (2+1)-dimensions

We study the nonlinearity for the zigzag graphene nanoribbons (ZGNRs) with zigzag triangular holes (ZTHs). We show that in the presence of an external uniform magnetic field, a two-dimensional f-deformed Dirac oscillator can be used to describe the dynamics of the electrons in the ZGNRs with ZTHs. It is shown for the first time that the magnetic field direction has effect on the chirality of charge carriers in the ZGNRs punched with triangular holes. We also obtain the Landau-level spectrum in the weak and strong magnetic field regimes. Additionally, we compare Landau-level spectrum of this graphene-based device in the f-deformed scenario and original one. Our results provide a general viewpoint for the development of the zigzag graphene nanoribbons.     

Performance Improvement of Acid Pretreated 3D-printing Composite for the Heavy Metal Ions Analysis

The performance enhancement of 3D-printed electrode comprised of polylactic acid (PLA) and graphite (Gr) doped with graphene oxide (GO) was studied to detect five heavy metal ions in trace level. The pretreatment of PLA/Gr/GO electrode with potential cycling in H₂SO₄ solution achieved the most sensitive response. The characteristics of the composite electrodes were verified using XPS, FE-SEM, EDXS, Raman, and impedance spectroscopy. The experimental variables affecting the response current were optimized with respect to pH, deposition time, ratio of PLA/Gr/GO, and supporting electrolytes. The pretreated 3D-PLA/Gr/GO electrode showed a wide dynamic range from 0.5 ppb to 1.0 ppm with low detection limits of 0.039–0.13 ppb. The reliability of the PLA/Gr/GO electrode was evaluated by analyzing the reference samples of European Reference Materials.     

Microwave Induced Reaction of H-Dimethylphosphonate with Styrene Oxide

Microwave catalyzed reaction of a neat mixture of styrene oxide and H-dimethylphosphonate furnished dimethyl methylphosphonate, trimethylphosphate, phenylacetaldehyde, 1-methoxy-2-phenylethanol, 1-phenylethleneglycol, cis- and trans-1,3-diphenylcyclobutanes, hydrogen 1-(2-phenylethyl)methylphosphinate, (1-phenylethyl)dimethylphosphonate, and (1-phenylethyl)dimethylphosphonate via free radical processes.